Category: Drones
-
ArduPilot Build – Simplified Documentation
Reproducibility: Using a Docker container to produce this build. Then, setup the build. Main Build Tool: ./waf TL;DR$ docker run –rm -it -v ./ardu-build:/builds python:3.11-alpine sh -c “cd /builds && sh”$ apk add nano htop openssh git curl wget gcc g++ make zlib-dev libffi-dev openssl-dev musl-dev gcc-arm-none-eabi g++-arm-none-eabi$ python -m pip uninstall empy && python…
-
3D Printed Drone Arms on a 3-inch Quadcopter is Unstable
Just a random throwback to another obscure thing- when I was working on my university’s senior design project, we had some 3D printed drone arms in what I think was PLA created for us due to a mis-order so we had to improvise while we waited for new ones to be cut. It turns out…
-
Tekko32 F4 Metal 4-in-1 65A – Motors Not Spinning
Had this issue after updating BetaFlight. I am using Tekko32 65A 4 in 1 ESCs in a Holybro Kakute H7 stack. https://holybro.com/products/tekko32-f4-metal-4in1-65a-esc-65a Solution Enable Bidirectional DShot Other Settings Tried Symptoms